Have you ever been in an Internet-connected situation with your phone but can’t open any page on the web? Well, ‘no internet secured’ is an unusual but solvable problem. Check your wireless icon in the lower right-hand side tray connected to the Internet through a WiFi router but can not get to any web page. You’ll most likely see a tiny yellow triangle, and you’ll see a ‘no internet secured’ message when you click on it.
This error happens for numerous reasons, the most common being a shift in your configuration settings, such as error due to your IP address, leading to Internet connection issues for your router. This issue can be triggered by any application, including an upgrade to the operating system.
How To Fix The ‘No internet Secured’ Problem
There are different ways to deal with it. It is a good idea to run through each of the choices below, as the problem can be solved by all of them.
It’s just that you don’t know which one would perform with any occurrence of this mistake! Since the exact cause of this error is hard to pin down, you’ll have to try one or more of these solutions.
Method 1 “No Internet Secured” Error Then Change The Property Of Your WiFi Connection
To adjust the features of your link and to repair the ‘no internet secured’, follow the steps below:
- Keep the Windows key and press the letter ‘R.’ Enter’ ncpa.cpl’ in the running window and click OK.
- This will open the window for “network connections.”
- Pick your WiFi connection, right-click on the WiFi connection and choose “Properties.”
- In the dialogue box, ensure that you have reviewed the following choices:
- User for networks with Microsoft
- File & printer sharing for Microsoft networks.
- I/O driver Link-layer topology discovery mapper
- Version 4 of the Internet protocol, or TCP/IPv44
- Version 6 of the Internet protocol, or TCP/IPv6
- Responder of link-layer topology discovery
- Then, press the network icon and find the WiFi network that is causing the error.
- Disconnect every Ethernet cable linked to your device
- On your computer, activate airplane mode.
- Restart the router’s WiFi
- Disable the airplane mode on your device after the WiFi router is up,
- Then link again to the WiFi connection, and it should work.
Method 2 Update The Network Adapter
An obsolete driver may often prevent your machine from connecting to the Internet and show ‘no internet secured’. To repair:
- In the Run dialogue box, press the Windows key + R and type ‘devmgmt.msc’ Click enter, and the system manager window will open.
- In this window, to extend it, double-click on “Network Adapters.”
- Identify the network adapter currently being used by your device, right-click it and select “Update Driver.”
- Click on the “Auto search” option in the “Update driver” dialogue box. Windows will check for the updated device driver.
- Next, open “network and sharing center.” To open, right-click the network icon in the notification area of your device and pick the “open network and sharing “center
- In the left-hand menu, check for “changing adapter settings” and click on it.
- Next, right-click on the wireless network and choose “properties.”
- Uncheck the version 6 (TCP/IPv6) internet protocol to disable it. Click on OK
- Close the window, and the machine will restart. You should be able to use the Internet right now.
So follow the above steps to solve “No Internet Secured” Error
Try uninstalling your network adapter if you still can’t reach the Internet. In order to do that:
- Open the system manager and double-click to enlarge the network adapters.
- Locate the network adapter you are using to connect to the Internet, right-click it and pick “Uninstall” to uninstall the network adapter from your device.
- First, look right at the top of the pane for a menu item called “action.” Click and select “Scan for changes to the hardware.” Windows will search and find the network adapter automatically and will even mount it for you.
- Wait for the installation and restart your computer afterwards.
This should fix any issues associated with the network adapter.
Method 3 “No Internet Secured” Error Then Modify The TCP/IP Properties
If you can’t connect to the Internet and it shows ‘no internet secured’, and if you’re using a Windows 10 Creators Update or a Windows 10 Fall Creators Update, try changing the TCP/IP configuration.
- Hold the Windows key and press ‘R.’ Enter’ ncpa.cpl’ in the running window, and then click OK.
- This will open the window for “network connections.”
- Identify the WiFi link, right-click it and pick “Properties.”
- Double-click Internet Protocol 4 and TCP/IPv44, respectively.
- Choose “Automatically obtain an IP address” and “Automatically obtain a DNS server”
- Tap the ‘Advanced’ button next. You will find it below the dialog box on the right.
- Go to a tab with the word ‘WINS’
- Scroll down to the NetBIOS setting and select the setting to allow NetBIOS over TCP/IP. On all the dialogue boxes, press OK.
Close all out. Wait and open the network adapter again for a few minutes. The IPv4 connectivity should be “Internet” this time, and any web page should open for you.
Hence follow the above steps to solve “No Internet Secured” Error
See also: Memory Management Error | 8 Easy Fixes
Method 4 Change Power Management Properties
The power management settings may be another potential cause of the ‘no internet secured’ mistake. If you are running the update of Windows 10 Creators or the Windows 10 Fall Creators Update edition, you will most likely face this problem. In order to work around this issue:
- To get to the Jump List, press the Windows key + X.
- Pick System Manager and Widen Network Adapters.
- Double-click and switch to the “power management” tab on your wireless network.
- Uncheck the option “Allow the computer to turn this device off in order to save power.”
- Restart your computer and check if it is now possible to connect to the Internet.
So follow the above steps to solve “No Internet Secured” Error
Conclusion
Yes, a common error is the ‘no internet secured’ error. Most definitely, you’ll get it on Windows 10 compared to other models. Since several changes in configuration settings can trigger this error, you will have to run through multiple options to get a patch. One of the above solutions, in our experience, should solve this issue for you.
See Also: The Default Gateway Is Not Available | Top 4 Fixes
Hello, I am McKenzie and I am totally obsessed with getting the best experience out of every device that I use. Hence, I started this blog to help others make the most of their devices and fix errors in a jiffy! 🙂
