USB Ports Not Working Error | 4 Easy Fixes

If you’re reading this article, then you’re probably stuck in a situation where your USB port is not co-operating, and a ‘USB ports not working’ error is popping up. Don’t worry. This article will help you resolve the issue. Here, we have mentioned the four most basic and easy to do methods that will help you fix the error. But before digging into it, make sure you know who the real defaulter is.

See Also: Driver WUDFRd Failed To Load Error | Fix in 3 Easy Ways

4 Ways To Fix the ‘USB Ports Not Working Error’

In case of connectivity issues, either the port or the device itself may be faulty. So make sure to check the device by connecting it to another USB port. If it works, then the prior USB port is faulty, and it was the USB port not working on Windows 10. But if it doesn’t, then the device is faulty and it is the USB not working on Windows 10. In such a case, you can either reformat the USB device or conveniently replace it. Is your Windows 10 taskbar frozen? Click here for solutions.

If it so turns out that your USB device is faulty, buy new USB from here on Amazon.

If the device fails to be detect or an erroneous message pops up on your screen stating the connectivity issue, it’s your USB port that is at fault. Under such circumstances, the below-mentioned methods will definitely help you out:

Method 1 USB Ports Not Working then Restart Your Computer

You might have noticed that restarting the computer is one of the most common fixes suggested for any issue whatsoever, and it is suggested for USB ports not working on Windows 10 as well. Ever wondered why? Simply cause it works! In this case, with your unrecognized USB device correctly inserted into the suspect USB port, rebooting your operating system helps in detecting the USB device. Once that happens, you’re good to go.

Another thing that you can do here to fix the USB Ports not working error is to press the power button of your laptop for 30 seconds or more. This simple step will help discharge the capacitors from your device, creating a hindrance for USB devices. Follow up with rebooting your system and then check if the error is resolve. In case it didn’t work, try following the other mentioned methods.

See also: Windows 10 Won’t Boot Error | Best 4 Fixes

Method 2USB Ports Not Working then  Adjust Power Management Settings

Windows is smart when it comes to saving its power. As a result, it switches your USB controllers off when they’re not in use and switches back on again when they’re needed. However, sometimes this process does not go as smoothly as intended Windows fails to switch your USB controllers on again. Thus, if you see Windows 10 USB not working, it’s good to check if the USB controllers are activated or not. In order to document that, follow the steps given below:

Open your Device Manager.

Alternatively, Press Windows +R keys, type devmgmt.msc in the Run dialog, and click “OK.”

 

1. Expand the Universal Serial Bus controllers branch.
2. Right-click USB Root Hub, select “Properties.”
3. Go to the Power Management tab, uncheck “Allow the computer to turn off this device to save power,” and click “OK.”
4. Repeat steps 2-3 to just Power Management in each USB Root Hub.
5. This method will most probably resolve the USB ports not working error. However, if this does not work too, switch to the next method.

Method 3 Scan Those Hardware Changes

Another one of these effective methods includes scanning your computer for any hardware updates. This can be easily done with the help of the Device Manager.

Open your Device Manager. Alternatively, Press Windows +R keys, type devmgmt.msc in the Run dialog, and click “OK.”

 

1. In Device Manager, click your computer so that it is highlight.
2. Click Action, and then click Scan for hardware changes.
3. Check the USB device to see whether it is working.

See also: Memory Management Error | 8 Easy Fixes

Method 4 Uninstall And Reinstall Universal Bus Controllers Drivers

If you see USB ports stopped working, try Re-enabling the USB controllers. It lets the controllers recover the USB port from its unresponsive condition. To do the same, follow the steps mentioned below:

 Open your Device Manager. Alternatively, Press Windows +R keys, type devmgmt.msc in the Run dialog, and click “OK.”

1. Expand the Universal Serial Bus controllers branch.
2. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
3. Repeat the above step for each USB controller that is under Universal Serial Bus controllers.
4. Wait for the process to complete and restart the PC.
5. After PC boots up, open the Device Manager window and go to the Action tab.
6. Select “Scan for hardware changes.”
7. Post this. Your PC will reinstall the USB controllers. Now try reconnecting the USB devices, and this time, they will appear connected without any USB ports not working error.

Conclusion

The ‘USB ports not working’ error is one of the most common errors you face while working on your computer. But you don’t need to panic at all. Start by finding the root cause of the problem and make sure you verify if the problem lies in the USB port or the USB device itself. Once you are sure that the port is the defaulter, you can try any of the above methods to resolve the issue. Either of the above-mentioned methods will surely help you get rid of this error, and you can satisfactorily go ahead with your work.

See also: No Audio Output Device is Installed | 4 Top Fixes [2023]