Ethernet Doesn’t Have A Valid IP Configuration | Top 4 Fixes

Internet protocol is a method by which data is sent from one device to another device. Each computer has its IP address. An IP address is equivalent to a home address or identity number. The IP address uniquely identifies one device from all other devices on the Internet. There can be many errors associated such as ‘Ethernet Doesn’t Have a Valid IP Configuration’.

See Also: “No Internet Secured” Error 4 Ways To Fix

When we send an email from one device to another, the message divides into little into small packets.Each of these packets holds the sender’s Internet Address as well as the receiver’s Internet Address. A packet projects to a gateway computer that understands a bit of the Internet. The gateway computer scans the destination address and sends the packet to an adjacent gateway that scans the destination address and sends it forward to another adjoining gateway.

ethernet doesnt have a ip

The process continues until one of the gateways recognizes the packet as pertaining to a computer within its domain. That gateway then sends the packet directly to the computer, whose address is in detail.

Packet delivery occurs through different routes on the Internet, and the order in which packets go out from the source can be different from the order in which packets will reach the destination. The role of Internet Protocol is more of a delivery. Another protocol named Transmission Control Protocol is responsible for putting the packets in order. 


IPv4 is a version of IP which is mostly use. For longer addresses, IPv6 is utilize. IPv6 encapsulates the capabilities of IPv4. Thereby any server which braces IPv6 packets braces IPv4 packets as well. 

Reasons For Ethernet Doesn’t Have a Valid IP Configuration

You may have received the erroneous dialogue box, which says, ethernet doesn’t have a valid ip configuration windows 10. This implies that your Ethernet connection not anymore bears IP configuration, and your operating system (Windows) is unable to obtain the necessary IP address from Dynamic Host Configuration Protocol. The onus of DHCP enables a server to automatically assign an IP address to your computer for a particular network. 


Having shown “Ethernet Doesn’t have a valid IP configuration” on your computer screen means that the computer can’t be allocated an IP address and hence failed to connect to a network. 

Ethernet 2 doesn’t have a valid ip configuration is chiefly owing to the following reasons:

  1. From erroneous/musty network adapters drivers 
  2. Incorrect Network Configuration 

Fixes For Ethernet Doesn’t Have A Valid IP Configuration

But you shouldn’t have to worry about ethernet does not have a valid IP configuration error at all. In this article, we offer how-to-fix “Ethernet Doesn’t have valid IP configuration.”

Method 1 Restart Your Device Along With Router/Modem

This is the simplest solution to your problem. You have to save all of your incomplete work and then shut down your computer.


Also, please take out your modem from the power plug and abandon it in this state for some minutes. Then, turn on your computer. Wait patiently till your computer is done with the self-test process. At last, Switch on your computer, and you’ll find that your wifi doesn’t have a valid IP configuration error is solve. Carry on with your task!

Method 2 Ethernet Doesn’t Have A Valid IP Configuration Then Delete Network Cache

  1. First, open cmd  from Start Menurun as administrater
  2. Windows+R >> type cmd >> press enter.) After the command prompt is open, type the “ipconfig” command into it. The former command will show you the present configuration of the installed IP stack on your networked computer.
  3. This method will clear and reset the DNS client resolver cache’s contents and make a new DHCP configuration.command
  4. Open a command prompt as administrator and type the following: Ipconfig/release Ipconfig/flushdns Ipconfig/renew. After executing the former commands, restart your computer and heave a sigh of relief. 

Method 3 Disable The Fast Startup feature

Follow the steps given below to remove the “Ethernet Doesn’t have valid IP configuration” error

  1. Move to your search bar at the bottom right and enter “control panel.” You can also directly open the searching feature by using the Windows + S keyboard shortcut. Click on the Control Panel application to launch itcontrol panel
  2. Put on the view mode to either small or large icons so that all Control Panel items are displayed, and then tap on Power Options Tap on the “Choose what the power buttons do” link on the left side of the window
  3. Press on the Change settings that are currently unavailable link. This may ask you to enter an administrator passwordsettings
  4. Uncheck the box. Turn on the fast startup option under Shutdown settings to switch the feature off and tap on Save changes.  This is going to disable the Fast Startup feature and solve issues with your Ethernet connection vi) Click on the Save changes button, and then restart your computer. This can also resolve the issue. 

See also: Top 5 Ways To Fix Slow Internet After Windows 10 Update

Method 4 Reinstall/Update Network Adapter Driver 

  1. Right-click the Start button and choose the “Device Manager” result from the menu, or you can also enter  “device manager” in the Search
  2. Finally, tap on the “Device Manager” result.
  3. Uninstall Device or alternatively update the driver to resolve the ethernet doesn’t have valid ip configuration error.


These were our 4 easy solutions to the Ethernet Doesn’t Have a Valid IP Configuration error. Do try them and let us know which one worked for you.

See also: How To Fix “This Device Doesn’t Support Miracast” On Windows 10

Recommended For You